South Florida fencing is not a national pricing market. The materials, labor, permit fees, soil conditions, hurricane wind requirements, and HOA approval overhead all vary enough between Broward and Palm Beach counties (let alone vs the rest of the country) that generic online cost calculators are almost always wrong. This guide gives you real 2026 numbers based on what Xtreme Fence quotes every week across our Coral Springs, Boca Raton, Fort Lauderdale, Pompano Beach, Delray Beach, Parkland, and surrounding markets.
The Short Answer
Most South Florida fence installations land between $25 and $75 per linear foot for the fence itself, before permits, gates, removal of an existing fence, or HOA-required upgrades. A typical 150-linear-foot residential job runs between $3,750 and $11,250 installed, with most customers landing somewhere in the $5,000 to $8,500 range depending on material and site complexity.
Cost by Material (2026 South Florida Pricing)
Vinyl Fence — $35 to $65 per linear foot installed
Vinyl (also marketed as PVC) is the most popular choice in South Florida and our most-quoted material. A 6-foot privacy vinyl fence runs about $45 to $65 per linear foot installed, while a shorter 4-foot ornamental vinyl runs $35 to $50. Heavy-gauge vinyl approved for high-velocity hurricane zone (HVHZ) installations adds about $5 to $10 per linear foot. Vinyl has the best long-term economics of any material in this climate because it requires no painting, staining, or board replacement over its 20-30 year lifespan.
Wood Fence — $25 to $45 per linear foot installed
Pressure-treated southern yellow pine in standard 6-foot privacy configurations runs about $30 to $40 per linear foot installed. Cedar runs higher at $40 to $55 per linear foot. Board-on-board styling adds about 15 percent over standard side-by-side picket. Shadowbox is roughly the same price as standard since it uses the same lumber quantity, just spaced differently. Wood has the lowest upfront cost but the highest lifetime cost because it needs staining or sealing every 2 to 3 years in our humidity.
Aluminum Fence — $40 to $75 per linear foot installed
Powder-coated aluminum in residential picket styles runs $40 to $60 per linear foot installed. Heavier estate-grade aluminum or commercial-spec configurations push to $60 to $75. Pool-code compliant aluminum installations (Florida Building Code 424) usually fall in the $50 to $65 range with the required self-closing self-latching gate hardware. Marine-grade powder coat for coastal homes adds about $4 to $8 per linear foot.
Chain Link Fence — $15 to $30 per linear foot installed
Galvanized chain link in residential 4-foot to 6-foot heights runs $15 to $22 per linear foot installed. Vinyl-coated chain link in black or green runs $22 to $30 per linear foot. Chain link is the most affordable option per linear foot and the easiest to repair or extend over time, but it provides no visual privacy and is rarely HOA-approved for front yards.
Composite Fence — $50 to $85 per linear foot installed
Composite fencing (wood-plastic blend) runs $50 to $85 per linear foot installed depending on profile and color. It hits a middle ground between vinyl and wood: more authentic wood aesthetic than vinyl, far less maintenance than real wood. Less common in South Florida than vinyl, but a strong choice for properties where appearance matters.
What Actually Drives the Number Up
Permit Fees
Fence permits in South Florida typically run $75 to $250 per project depending on the city. Coral Springs charges about $130 for a standard residential fence permit. Boca Raton runs around $115 to $150 depending on fence height and length. Fort Lauderdale residential fence permits start around $135. Unincorporated Broward and Palm Beach county permits run $100 to $175. For a full permit guide by city, see our fence permit guide for South Florida.
HOA Approval Overhead
About 60 percent of homes we quote in Broward and Palm Beach are in HOA communities. The HOA approval process itself does not add to material cost, but it can add 2 to 6 weeks to your timeline and may force material upgrades. Some HOAs require black aluminum (more expensive than white vinyl) for uniformity. Some restrict to specific styles that may not be the most cost-effective option. We help every customer assemble the HOA approval package so your application clears on the first submission.
Hurricane Wind Zone (HVHZ) Requirements
Properties in coastal Broward and Palm Beach trigger high-velocity hurricane zone requirements that add about 8 to 15 percent to material and installation cost. HVHZ-rated vinyl uses thicker walls and reinforced posts. Aluminum HVHZ installations require deeper concrete footings (usually 36 inches versus the standard 24). For pool installations near the coast, both pool code and HVHZ specs apply, which can stack.
Gates and Hardware
Single walk gates add $250 to $450 each depending on width and material. Double-drive gates run $500 to $1,500. Self-closing self-latching pool-code hardware adds $75 to $150 per gate. Automatic gate openers (residential single or double swing) start around $1,800 installed and run to $3,500 for higher-end commercial systems.
Removal of Existing Fence
If we are replacing an existing fence, removal and disposal typically adds $3 to $7 per linear foot depending on the existing material. Chain link comes out fastest. Concrete-set wood posts that have rotted at the base can take longer and add to labor.
Site Conditions
Sloped lots, rocky soil, large root systems, or limited access driveways can add 10 to 25 percent to installation cost. Most coastal South Florida properties are flat and easy to install, but properties in western Broward, Wellington, and Jupiter sometimes have rockier conditions that require longer drilling time per post.
Labor vs Material Breakdown
For most residential fence installations in this market, materials account for 50 to 60 percent of the total cost and labor accounts for 40 to 50 percent. Wood projects skew more material-heavy (60/40) because lumber is the biggest cost driver. Aluminum and vinyl skew more balanced (55/45). Chain link is roughly 50/50 because the labor of stretching fabric and tensioning is significant relative to the lower material cost.
Sample Project Pricing
Standard Residential Vinyl Privacy (150 feet)
- 6-foot heavy-gauge white vinyl: $45 per linear foot installed = $6,750
- Add one double-drive gate: $850
- Permit (Coral Springs): $130
- Total: about $7,730
Pool Code Aluminum (90 feet)
- 4-foot black aluminum pool fence: $52 per linear foot installed = $4,680
- Self-closing self-latching pool gate: $375
- Permit (Boca Raton): $135
- Total: about $5,190
Budget-Friendly Backyard Chain Link (200 feet)
- 6-foot vinyl-coated black chain link: $24 per linear foot installed = $4,800
- 4-foot walk gate: $295
- Permit (unincorporated Broward): $115
- Total: about $5,210
Wood Privacy with HOA Stain (180 feet)
- 6-foot board-on-board pressure-treated: $38 per linear foot installed = $6,840
- Initial stain coat (required by HOA): $4 per linear foot = $720
- Single walk gate: $325
- Permit (Pompano Beach): $125
- Total: about $8,010
Should You DIY?
We get this question often, especially from homeowners with construction backgrounds. Honest answer: for chain link or simple wood, a determined DIYer can save 30 to 40 percent on labor. For vinyl, aluminum, or any pool-code installation, DIY is rarely worth it because the post-setting precision required for level panels and code-compliant gate hardware is unforgiving. HOA approvals also typically require a licensed contractor for any vinyl or aluminum work. We have repaired more DIY vinyl fences than we have ever installed for owners who tried it first.
Frequently Asked Questions
How much does it cost to fence a quarter-acre yard in South Florida?
A quarter-acre yard has roughly 200 to 220 linear feet of perimeter depending on lot shape. In vinyl that runs about $9,000 to $13,000 installed including a gate and permit. In wood it runs $5,500 to $8,500. In chain link it runs $3,200 to $5,500.
How much does it cost to fence in just the backyard?
Most residential backyards in this market need 80 to 130 linear feet of fence to close the perimeter (the house itself accounts for the remaining side). Vinyl backyard projects typically run $4,000 to $7,500 installed. Wood runs $2,800 to $5,000. Aluminum runs $4,500 to $7,800.
Why are some quotes so much lower than yours?
Three usual culprits: unlicensed installers using thin builder-grade vinyl that fails in our wind, missing the permit (a fence built without a permit can be ordered to be torn down and rebuilt), and skipping concrete on the posts (the single biggest cause of premature fence failure in our soil). Always verify the contractor is Florida-licensed and pulls a permit. Cheap fences end up costing more when they fail in the first storm.
Do fence companies in South Florida finance projects?
Yes. Xtreme Fence partners with home improvement financing companies that offer 12-month same-as-cash and longer-term fixed-rate options. For a typical $7,000 vinyl project, monthly payments on a 60-month plan run about $150 to $175 depending on credit.
How much will my fence cost compared to neighbor’s that was installed 5 years ago?
Material costs have risen about 18 to 25 percent since 2021 in this market, mostly driven by aluminum and pressure-treated lumber commodity prices. A fence that cost your neighbor $5,000 in 2021 would run about $6,000 to $6,300 today for the same specs.
How to Get an Accurate Number for Your Property
The cost ranges above are real, but every property has its own permit fee, HOA situation, and site conditions that can shift the final number. The fastest way to get an accurate quote is a free on-site consultation. We measure, check setback requirements, look at your HOA covenants if applicable, and email you a written quote within 24 hours. Contact Xtreme Fence for your free estimate, or call us at (954) 851-6610.
Want to dive deeper into your specific city or material?